Augusta Cotton/Lycra/Spandex Shorts

90 percent cotton/10 percent Lycra spandex; ladies fit; two panel construction; covered elastic waistband; no side seams; 4-inch inseam; double-needle stitching at bottom. (Perfect for Cheer, Gym, PE and Spiritwear.) **PURPLE IS BACKORDERED UNTIL JULY 2008**
Customer Review: please
One word and one word alone epitomizes what Maxim--in its beastly and single-minded goal--stands for and celebrates in its bacchanalia of hedonism and materialism: SEX!!!! Sex in all its indulgent forms from the objectification of women, to sex for selling products, to sex for underestimating and furiously encouraging men to be predominantly lecherous is featured--nay, aggressively feted--on its sm*t pages. Maxim's essentially s*ftcore p*rn targeted at young teens who haven't yet seen their first, real, hardc*re movie.

Made of aluminum and dual carbon fiber chain and seat stays, the racing bicycle provides a dynamic posture to the rider trough its lightweight and raised seat. For swift turning, the front and rear wheels are closely arranged. The racing wheel forms a teardrop with the tire because of its triangular cross-section, built for greater aerodynamic efficiency. To reduce wind resistance and to add overall efficiency the number of spokes in the wheel is low. But still, when it comes to hill climbing bicycles it is used a traditional box-sectioned rim.

Because of their lightweight and easily moldering, racing bikes rims are made of aluminum. In spite of those properties, some bicycles carbon fiber is used to make the rim, because these rims are lighter but they tend to crack easily and chip when the wheel punctures. This is the reason for which the riders prefer cheaper and heavier wheels for training.

To reduce wind resistance and road friction, the tires are lightweight, narrow and have smooth treads. They are inflated to a pressure of around 8 bars. Many bicycles have a sort of tubular tires that are sewn round the rube and glued to the rim. Recently, cyclists started preferring tubular clincher tires. In spite of this, the opinions regarding the merits and demerits of the two tires still remain divided.

The bicycle use for racing presents a carbon frame, and its components are referred to as a group-set. The frameset, fork, wheel-set, bars, stem, pedals, saddle and seat post are not included in the group-set.

Most racing bike components are made of carbon-fiber. For example, high-end shifters, brake levers, cranks are made of carbon-fiber. Also, stems, handlebars, shoe soles, forks and seat-posts are also made by carbon-fiber. Carbon-fiber is often used because is very light and has a high capacity to absorb vibrations.

Important specifications of racing bikes:

1. Wheels equal diameter, between 70-55 cm, have a minimum of 12 spokes

2. Maximum length 185 cm

3. Maximum width 50 cm

4. Saddle length between 24 30 cm

5. Distance between the bottom bracket spindle and ground between 24 and 30 cm

6. Maximum internal distance between front fork ends 10.5 cm and of the rear stays about 13.5 cm.

7. Maximum weight 6.8kg

George Wood is a successful webmaster of many popular sites including football and elliptical trainers site. If you want to read more about cycling, click over to George cycling site.

Exercise Bikes Parts